Sheepey Inc Series by Web Camshafts - AS1 B/H Series VTEC Camshafts


This camshaft is for the turbo cars making 500whp+ looking for some more topend and to free up easy boost. The camshaft
still has well paired primary lobes to maintain great drivability. Many of the 67mm Street trim cars run this cam profile. This setup works great on stock cylinder heads with performance valve jobs. 

  • Aftermarket valvetrain required to prevent coil bind and valve float.
  • Suggested to change stock LMAs with ITR/H22s with more clearance. 
  • Check the valve spring retainer to valve guide clearance at maximum lift. Must have minimum of .030" clearance.

Camshaft specs are actual specs you will see in the engine. No advertise or "level" BS here, just real deal specs.

Intake - 
Duration at .050 - 260
Valve lift - .480

Exhaust - 
Duration at .050 - 257
Valve lift .468

All of our turbo manifolds maintain a 10 year warranty to the original owner from the purchasing date. Our warranty covers all material and manufacturing defects. All of our fabrication is done in house in the USA. We utilize the best material and fabricator available to ensure that you'll never have a problem. We do NOT cover warranty claims on issues caused by you. We also do not warranty second hand owners at this time.

It is illegal to install an aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part has an executive order from CARB. Installation of parts which are not CARB-approved on a pollution controlled vehicle in the state of California may result in the DMV revoking the vehicle registration and title, refusing the transfer of registration, and/or the vehicle failing smog inspection. Law enforcement may cite you for the use of an illegal aftermarket part and seize your title and license plate.

Recently Viewed Products